Jar Tester
The equipped lighting allows you to clearly check the floc during jar tests.
Features
[1] Exterior uses all stainless steel plates.
[2] Uses a digital tachometer.
[3] The agitator shaft can be lifted and freely stopped at any point. The shaft is made of SUS304 stainless steel, and the blades are polyvinyl chloride.
[4] Features two H-type timers that can automatically switch between rapid and slow agitation, and three T-type timers that can automatically switch between rapid/slow agitation and stop.
[5] The T-type timers can be operated continuously through manual and automatic switching.
[6] All models come equipped with chemical feeders. You can feed chemicals simultaneously by turning the handle on the side.
[7] Comes equipped with back lighting and floor/back lighting.
[8] Can be optionally equipped with chemical feeder tubes.
Applications
[1] Pre-treatment of industrial water
[2] Waste water flocculation
[3] Waste water purification reaction
[4] Disinfection and sterilization of drinking water
[5] Reactivity tests
[6] pH colormetric measurements
[7] Disinfection and sterilization titration tests for pools and tanks
Product Specifications
●MJS-2H to 8H (standard types) RPM displayed digitally.
| Model | MJS-2H | MJS-3H | MJS-4H | MJS-6H | MJS-8H |
|---|---|---|---|---|---|
| No. of beakers | 2 | 3 | 4 | 6 | 8 |
| Beaker capacity | 300 – 1000mL | ||||
| RPM | 30 – 200rpm (max. 280rpm/50Hz – 340rpm/60Hz possible) | ||||
| Tachometer | Digital display | ||||
| Timer (Agitation time) |
Automatically switches between rapid and slow agitation Two solid state timers (0.1 – 9990 hours, multi-time specifications) |
||||
| Motor | 6W | 15W | 15W | 25W | 40W |
| Chemical feeder tube | 2 | 3 | 4 | 6 | 8 |
| Power | AC100V single phase 50/60Hz, 3m power cord | ||||
| External dimensions[mm] | H415 | D301ｘ H415 |
D301ｘ H415 |
D301ｘ H415 |
D301ｘ H415 |
| Lighting | Back lighting | ||||
| Alarm | Alarm sounds when switch from rapid to slow agitation is complete | ||||
| Weight | 16kg | 21kg | 24kg | 29kg | 34kg |
●MJS-2T to 8T (Multi-type)
Potentiometer allows for fine adjustments and locking at any RPM.
Beakers with a max. 2L capacity can be loaded. Floor/back lighting and two stage chemical feeder
Rapid/slow and standing time can be controlled by timer.
| Model | MJS-2T | MJS-3T | MJS-4T | MJS-6T | MJS-8T |
|---|---|---|---|---|---|
| No. of beakers | 2 | 3 | 4 | 6 | 8 |
| Beaker capacity | 300 – 1000mL | ||||
| RPM | 30 – 200rpm (max. 280rpm/50Hz – 340rpm/60Hz possible) Toothed belt drive |
||||
| Tachometer | Digital display | ||||
| Timer (Agitation time) |
Automatic switching between rapid/slow agitation and standing time 3 digital quartz timers (can be operated continuously using the manual-automatic switch) |
||||
| Motor | 15W | 15W | 25W | 40W | 40W |
| Chemical feeder tube | 4 | 6 | 6 | 12 | 16 |
| Power | AC100V single phase 50/60Hz, 3m power cord | ||||
| External dimensions [mm] |
W470ｘ D300ｘ H503 |
W635ｘ D300ｘ ｘH503 |
W800ｘ D300ｘ ｘH503 |
W1130ｘ D300ｘ ｘH503 |
W1460ｘ D300ｘ ｘH503 |
| Lighting | Floor/back lighting (with black shade) | ||||
| Alarm | Alarm sounds when switch from rapid to slow agitation and standstill time is complete | ||||
| Weight | 22kg | 27kg | 32kg | 42kg | 52kg |
| Safety equipment | Safety equipment Circuit breaker/fuses | ||||
MJS-P Series Jar Tester (Portable Type)
Lightweight aluminum body to make carrying easy.
Features
[1] 30 – 185rpm (50Hz), 30 – 200rpm (60Hz) Speed can be adjusted by turning the knob while watching the digital tachometer.
[2] The agitator shaft can be lifted and freely and stopped at any point. The shaft is made of SUS304 stainless steel, and the blades are polyvinyl chloride.
[3] The exterior uses anodized aluminum and will not rust.
[4] Comes with 2 timers that can automatically switch between rapid and slow agitation. Agitation will stop and alarm will sound after a pre-set time.
[5] All models come equipped with chemical feeders. You can feed chemicals simultaneously by turning the handle on the side.
[6] Equipped with back lighting. (Floor lighting types also available.)
Applications
[1] Pre-treatment of industrial water
[2] Waste water flocculation
[3] Waste water purification reaction
[4] Disinfection and sterilization of drinking water
[5] Disinfection and sterilization titration tests for pools and tanks
[6] Reactivity tests
[7] pH colormetric measurements
Product Specifications
| Model | MJS-2P | MJS-3P | MJS-4P |
|---|---|---|---|
| Beaker capacity | 500mL | ||
| No. of beakers | 2 | 3 | 4 |
| External dimensions[mm] | W269ｘD200ｘH460 | W385ｘD200ｘH460 | W485ｘD200ｘH460 |
| Weight | 11kg | 13kg | 14kg |
